V5 2020-04-01T18:01:52+00:00

V5

The Studiomaster V5 line array is a new development of a two way system providing superior performance with a flat frequency response and phase response in a range of 60Hz-20KHz. Ultra compact providing impressive power levels.

V5

Line Array

The Studiomaster V5 line array is a
new development of a two way system
providing superior performance with
a flat frequency response and phase
response in a range of 60Hz-20KHz.
Ultra compact providing impressive
power levels.

The V5 HF/MF system consists of two 5” MF drivers combined with a 44mm HF compression driver. This tuned combination greatly reduces the cabinets weight and size, yet still producing high volume and SPL specifications. The trapezoidal enclosure is designed to keep the loudspeakers operating the way they are intended with sound dispersion aimed towards the front.

The aluminium suspension system provides 0°- 10° of adjustment to achieve the ideal positioning. Connections to the V5 are through two NL4MP 4pin connectors. The cabinets are finished in a special elastic effect hard wearing paint, and are further protected with a tough grille. The matching V5S LF passive cabinet uses the same small footprint cabinet shape as the smaller V5 HF/MF unit. The V5S features two 10“ high power LF drivers with 2.6” voice coils. The vented horn design further improves the already high efficiency.

If you choose the active sub bass the V5SA to drive your system, then you will benefit from all the features of the V5S, but also have your sound amplified through the built in linear amplifier with DSP audio processing, to perfectly match your signal to the cabinets. The power amp module boasts variable speed fan cooling, overload and short circuit protection. Thermal protection is intelligent and linked to the DSP. If temperatures rise out of the set limit, the DSP will attenu- ate the output from the amplifier, and if required for protection shut down the amplifier to ensure future reliability. Status LEDs to show overload and peak situations are easily visible fom the rear panel.

Specification

V5

MAX SPL – LF 116dB / HF 127dB
PEAK – LF 400W / HF 200W
PGM – LF 200W / HF 100W
RMS – LF 100W / HF 50W
WEIGHT – 11kg
Cabinet type – 2-way passive line array
Frequency response – 60Hz – 20kHz (-10dB)
80Hz – 18kHz (+/-3dB)
Sensitivity 1w@1m – LF 90dB / HF 104dB
Coverage (h x v) – 90 degree x angle dependent
LF Driver – 2 x 5” / 25mm VC
HF Driver – 1 x 1.75” / 44mm VC
Impedance – LF 16 ohm / HF 16 ohm
Crossover frequency – 80Hz / 1.7kHz
Vertical spread angle – 0-10 degree (2 degree step)
Dimensions (wxhxd) – 483 x 171 x 351mm

V5S

MAX SPL – 130dB
PEAK – 1000W
PGM – 500W
RMS – 250W
WEIGHT – 31kg
Cabinet type – passive line array woofer
Frequency response 50Hz – 350Hz (-10dB) / 55Hz – 300Hz (+/-3dB)
Sensitivity 1w@1m – 97dB
Coverage (h x v) –
LF Driver – 2 x 10” / 65mm VC
HF Driver –
Impedance – 4 ohm
Crossover frequency – 80Hz
Vertical spread angle –
Dimensions (wxhxd) – 483 x 410 x 623mm

V5SA

MAX SPL – 130dB
POWER – 750W+750W
WEIGHT – 33kg
Cabinet type – active line array woofer
Frequency response – 50Hz – 350kHz (-10dB) / 55Hz – 300Hz (+/-3dB)
Input sensitivity – 0dBu
Coverage (h x v) –
LF Driver – 2 x 10” / 65mm VC
HF Driver –
Impedance – LF AMP + 4x 4ohm output for MF/HF
Crossover frequency – 80Hz
Vertical spread angle –
Dimensions (wxhxd) – 483 x 410 x 680mm

The V5 HF/MF system consists of two 5” MF drivers combined with a 44mm HF compression driver. This tuned combination greatly reduces the cabinets weight and size, yet still producing high volume and SPL specifications. The trapezoidal enclosure is designed to keep the loudspeakers operating the way they are intended with sound dispersion aimed towards the front.

The aluminium suspension system provides 0°- 10° of adjustment to achieve the ideal positioning. Connections to the V5 are through two NL4MP 4pin connectors. The cabinets are finished in a special elastic effect hard wearing paint, and are further protected with a tough grille. The matching V5S LF passive cabinet uses the same small footprint cabinet shape as the smaller V5 HF/MF unit. The V5S features two 10“ high power LF drivers with 2.6” voice coils. The vented horn design further improves the already high efficiency.

If you choose the active sub bass the V5SA to drive your system, then you will benefit from all the features of the V5S, but also have your sound amplified through the built in linear amplifier with DSP audio processing, to perfectly match your signal to the cabinets. The power amp module boasts variable speed fan cooling, overload and short circuit protection. Thermal protection is intelligent and linked to the DSP. If temperatures rise out of the set limit, the DSP will attenu- ate the output from the amplifier, and if required for protection shut down the amplifier to ensure future reliability. Status LEDs to show overload and peak situations are easily visible fom the rear panel.

Specification

V5

V5S

MAX SPL
PEAK
PGM
RMS
WEIGHT
Cabinet type
Frequency response

Sensitivity 1w@1m
Coverage (h x v)
LF Driver
HF Driver
Impedance
Crossover frequency
Vertical spread angle
Dimensions (wxhxd)

LF 116dB / HF 127dB
LF 400W / HF 200W
LF 200W / HF 100W
LF 100W / HF 50W
11kg
2-way passive line array
60Hz – 20kHz (-10dB)
80Hz – 18kHz (+/-3dB)
LF 90dB / HF 104dB
90 degree x angle dependent
2 x 5” / 25mm VC
1 x 1.75” / 44mm VC
LF 16 ohm / HF 16 ohm
80Hz / 1.7kHz
0-10 degree (2 degree step)
483 x 171 x 351mm

MAX SPL
PEAK
PGM
RMS
WEIGHT
Cabinet type
Frequency response

Sensitivity 1w@1m
Coverage (h x v)
LF Driver
HF Driver
Impedance
Crossover frequency
Vertical spread angle
Dimensions (wxhxd)

130dB
1000W
500W
250W
31kg
passive line array woofer
50Hz – 350Hz (-10dB)
55Hz – 300Hz (+/-3dB)
97dB

2 x 10” / 65mm VC

4 ohm
80Hz

483 x 410 x 623mm

V5SA

MAX SPL
POWER
WEIGHT
Cabinet type
Frequency response
Input sensitivity
Coverage (h x v)
LF Driver
HF Driver
Impedance
Crossover frequency
Vertical spread angle
Dimensions (wxhxd)

130dB
POWER 750W+750W
33kg
active line array woofer
50Hz – 350Hz (-10dB)
55Hz – 300Hz (+/-3dB)
0dBu

2 x 10” / 65mm VC

LF AMP + 4x 4ohm output for MF/HF 80Hz

483 x 410 x 680mm

Find your subs

V-SERIES subwoofers

Coming soon

download our
Catalogue

Download