VPX
series - Active 10", 12" & 15" Moulded speaker
systems
Click
on the images
to see the detail
Introduction
Specification
If you're looking for a portable, active speaker system, you have every reason to be very demanding. The speakers you're looking for have to be tough, affordable and sound good. This is where the Studiomaster VPX range comes in. This attractive range of moulded cabinets, consisting of three models packed with features, has been designed to give you the results you demand. Easy to carry and easy to use, the VPX speakers will transform your sound.
The VPX12 and VPX15 boast separate amplifiers. This means that each amplifier can be designed to match the speaker it's driving. Why waste amplifier power on low frequencies. You'll get better control, better sound and you don't have to carry around an amplifier you don't need.
The input connector is a balanced 3 pin XLR and it's switchable for mic and line use so you can use it with more or less any input. The three band EQ gives you the control you need when you're using the VPX as an all in one PA system. If you want to use your VPX with an external mixer, the on-board gain and level controls allow signal matching without any compromises. The VPX range is fitted with premium quality cast aluminium chassis bass speakers and a high frequency unit which is integrated into the moulded 60x90 degree horn flare to ensure you enjoy smooth high frequencies.
The VPX 15 sub can provide you with a maximum 600Watts of thunderous bass power and is an ideal partner for the VPX12 or 15. Inside the rear panel are two 100Hz crossovers that will accept a mono or stereo signal from you mixer. If you us stereo, it will mix the bass frequencies to mono (sound is non directional at low frequencies) while allowing the high frequencies through, in stereo, to you mid/high speakers. So you can use a single VPX15 sub with a pair of VPX12 & 15 cabinets and still get a great sound.
The VPX range is not only simple but flexible. For example, the ideal set up would use a pair of VPX12s and a pair of VPX15subs. If a smaller PA is all you need, just use the VPX12s on their own as a compact system and leave the subs at home. The VPX15 is a good all-rounder combining value with performance, flexibility and convenience.
VPX10
VPX12
VPX15
VPX15 sub
Output Power (music)
250W
300W
400W
600W
Frequency response
60Hz-15Hz
45Hz-18kHz
40Hz-18kHz
39Hz-110Hz
Maximum SPL
120dB
121dB
122dB
126dB
Crossover frequency
2.5kHz
2.5kHz
2.5kHz
100Hz
HF Amplifier
(music)
50W
50W
100W
-
LF Amplifier
driver
200W
250W
300W
600W
Low frequency
driver
10" Cast Chassis
12" Cast Chassis
15" Cast Chassis
15" Cast Chassis
Compression
driver
1.35" diaphragm
1.75" diaphragm
1.75" diaphragm
-
Nominal despersion
(horizontal)
90 degrees
90 degrees
90 degrees
-
Nominal despersion (vertical)
60 degrees
60 degrees
60 degrees
-
Connection
Inputs (Excluding sub)
Inputs VPS 15sub only
Balanced XLR, male XLR link socket
Balanced XLR, male XRR link socket, filtered High Pass male XLR
Power Requirements
Voltage Selector
230V range ± 10% ~50/60Hz 115V range ± 10% ~50/60Hz
HIGH EQ
MID EQ
LOW EQ
±15dB @12.5Hz
±12dB @2.5Hz
±15dB @60Hz
±15dB @12.5Hz
±12dB @2.5Hz
±15dB @60Hz
±15dB @12.5Hz
±12dB @2.5Hz
±15dB @60Hz
-
-
-
Size
Width (max)
Height
Depth
310mm(12.2")
530mm(20.9")
345mm(13.6")
330mm(13")
630mm(24.8")
410mm(16.1")
365mm(14.4")
720mm(28.3")
495mm(19.5")
570mm(22.4")
630mm(24.8")
515mm(20.3")
Weight
Net
Shipping
17kg (37.4lb)
21kg (46.2lb)
20kg (44lb)
25kg (55lb)
25kg (55lb)
30kg (66lb)
32kg (70.4lb)
38kg (83.6lb)
Features
Portable,
self contained active speaker systems
plug-and-play PA solutions
VPX12
& 15 with mic/line inputs and 3 band EQ
everything you need
You
can use free standing or on poles
your VPX system will really perform
Cast
chassis speakers
premium quality and superior soundt